Seagate Backup Plus Slim 2tb Keeps Making a Beeping Noise

Seagate Backup Plus Slim 2tb Keeps Making Beeping Noise

The Seagate backup plus is usually a trouble-free drive, but there are times when it gives out a sound like a click or a buzzer sound when connected to a computer. But it is considered normal since it is running on a computer. Follow these below instructions the Seagate backup plus slim 2tb keeps making beeping noise.

  1. There are times when the device gives out abnormal sounds like a click, beep, or vibration or grinding that indicates that there might be an error with the device.
  2. There are several complaints that the Seagate device makes normal noise when it is connected to the computer and while it is performing an action like transferring files from and to the computer.
  3. The hardware noise usually occurs and is common on Seagate devices.
  4. The noises also occur in other external brand hard drives like the Transcend, WD My passport, etc.
  5. In a hard drive, the sound may also come from the inside if there is any internal damage.
  6. The next thing is to check if the Seagate hard drive is really at fault.
  7. Follow these steps we can execute that the Seagate backup plus slim 2tb keeps making beeping noise.

You can follow the instructions and find a solution to fix the beeping sound on your Seagate Backup Plus Slim 2TB.

Method 1: Clear the dust

The reason for a beep sound, could be the dust accumulated in it. Refer to the simple steps to know how to clean out the dust from the USB port of the device.

  1. Disconnect the external device from the computer.
  2. Unplug the cable from the Seagate device.
  3. Blow air into the ports of the computer, the cable, and also the hard drive.
  4. Doing this will move out of the dust stored inside the ports.
  5. Reconnect the cable to the Seagate device and connect it to the computer to see if the beeping sound is produced.

Method 2: Use another Cable

  1. Sometimes, the issue can also occur if there is any fault with the cable you are using for the Seagate device to connect to your computer. The problem could be due to a damaged data cable.
  2. You can try using a different cable to connect the Seagate external hard drive to the computer.
  3. Once done, check to see if changing the cable resolves the being issue.

Method 3: Plug the Seagate device to a different port

  1. One more reason that could cause the Seagate device to beep must be because of a faulty port on your computer.
  2. The computer usually comes with multiple USB ports, so you can easily switch the port.
  3. Disconnect the cable connected to the computer and reconnect it to a different port on the computer.
  4. See if the hard drive noise is gone after this step.
  5. Using these steps we can execute that the Seagate backup plus slim 2tb keeps making beeping noise.

Method 4: Plug to a USB hub

  1. The Seagate device might produce a beep sound when the computer or the USB port does not have enough power to support the device.
  2. It is safer to use the USB-Y cable that comes with two connectors to get rid of the beeping sound.
  3. Make sure the USB hub or the two connectors are plugged to the computer tightly.

Method 5: Connect the device to another computer

    If the above methods do not fix the hard drive beeping issue, you can resort to one last step.

  1. Try connecting the Seagate external hard drive to a different computer to see if the device produces beeping sound in this case.
  2. If the issue is resolved, you can zero-in on the computer’s USB port having the issue and no issue with the Seagate backup plus external hard drive.

Perform a CHKDSK in the Command Prompt

  1. To check your Seagate hard drive, you can use the Windows CHKDSK command-line tool. Please make sure the PC can recognize the disk.
  2. Click the Start button and open the command prompt, an alternative way to open the command prompt is by pressing the Windows + R Keys.
  3. The shortcut key will open the Run command, type cmd and hit the Enter button.
  4. When the command prompt opens, enter the command: Chkdsk g:/r
  5. The command prompt will run the command and check for errors with the connected external hard drive.
  6. Fix the errors if any detected.
  7. By using these steps we can execute that the Seagate backup plus slim 2tb keeps making beeping noise.