Seagate Backup Plus Slim 1tb Won’t Connect

Seagate Backup Plus Slim 1tb Won't Connect

The ‘Seagate Backup Plus Slim 1TB hard drive won’t connect’ is one of the common issues faced by most of the Seagate users, and it occurs due to incorrect connection settings. The user will receive a pop-up message with a beeping noise or sound saying Won’t connect. Perform the basic troubleshooting steps discussed below to solve this issue.

  1. Make sure that the USB cable is connected properly between the drive and laptop ends.
  2. Try connecting the USB cable to the different port of your computer.
  3. To check if your computer is causing the issue, connect the Seagate Backup Plus Slim 1TB hard drive to different computers.
  4. If the USB cable is causing the issue, replace it with a new one.
  5. Then, connect the Seagate hard drive to your computer.
  6. Make sure that the external hard drive is not damaged physically.
  7. If so, contact the manufacturer or dealer and get it replaced.

To solve the Seagate 1TB Backup Plus Slim hard drive won’t connect issue on your Windows 7 and Vista computer, read and proceed with the guidelines given below.

  1. First, check the power cable connection for the Seagate external hard drive.
  2. Make sure that the power cable is mounted correctly at the ends of the electrical outlet and the hard drive.
  3. If the connectivity status is free or not mounted properly, tighten the ends and then check if the won’t connect to the computer issue has been resolved.
  4. If the Seagate Backup Plus hard drive still does not connect to the computer, then check if any other device is connected to your device.
  5. If so, disconnect it and then try connecting your Seagate hard drive to the computer.
  6. Make sure that the data cable is connected properly.
  7. By using these steps we can execute that the Seagate Backup Plus Slim 1tb Won’t Connect.