- Seagate Support »
- Seagate NAS Reset Admin Password
Reset Seagate Nas Username And Password
- How to connect Seagate Backup Plus 3TB?
- Windows 7 or Vista requests Drivers
- Backup Plus 3TB Hard drive not detected
- Connect Backup Plus 3TB External Drive to a USB port.
- How to Use Seagate Backup Plus 3TB?
- How to find out the backup files on Backup Plus 3TB Desktop Drive?
- Eject Backup Plus 3TB Safely
- Moving data between two systems
- Seagate-S drive Missing
- Windows Disk Error Checking on Backup Plus 3TB
Seagate Business NAS:
When you have forgotten the username or password of the Seagate Business NAS device, carry out the step-by-step instructions that how to reset seagate NAS provided here
- Mostly, the Reset button is located at the rear side of the Seagate Business NAS device.
- Note: The Reset button’s location depends on the model of the NAS device.
- Check if the Seagate Business NAS device is turned up.
- Hold the Reset button on the Seagate Business NAS device using a paper clip.
- Note: The Reset button must not be holding more than 10 seconds.
- The device’s name will be reset to its default. Also, the assigned static IP address will be reset.
- The DHCP feature will also be re-enabled.
- Turn off the Seagate Business NAS device. After two minutes, turn on the Seagate Business NAS device.
- Open the Seagate NAS Discovery software and use the default username and password to access NAS.
- The default username and password of the Seagate Business NAS device are ‘admin.’
- follow the above instruction that how to reset seagate NAS username and password
Seagate BlackArmor NAS:
If you want to reset the Seagate BlackArmor NAS device to the factory default settings, follow the easy guidelines provided on this web page.
- Before proceeding with this procedure, you must backup all your data from the Seagate BlackArmor NAS device.
- First, download the Factory Reset tool from its official website.
- Once done with downloading, open the FactoryDefault.exe file. Now, the factory to default application will appear on the screen.
- Enter the correct MAC address of the Seagate BlackArmor NAS drive in the appropriate field.
- After clicking the Calculate button, right-click and copy the link that appears in the next field.
- Go to your computer, launch a web browser, and enter the IP address of the Seagate BlackArmor NAS drive.
- This will launch the Seagate BlackArmor NAS drive’s login page.
- Type one forward slash at the end of the NAS drive’s IP address and paste the link that was displayed on the Factory Reset tool.
- The Default Configuration web page will be displayed on the screen.
- Click the Factory Restore button followed by the OK button. This reset process may take up to 2-12 hours.
- By using these steps that how to reset Seagate NAS username and password.