- Seagate Support »
- How to Reset Seagate Nas Password
To Reset Seagate Nas Password And Username
- How to connect Seagate Backup Plus 5TB?
- Windows 7 or Vista requests Drivers
- Backup Plus 5TB Hard drive not detected
- Connect Backup Plus 5TB External Drive to a USB port.
- How to Use Seagate Backup Plus 5TB?
- How to find out the backup files on Backup Plus 5TB Desktop Drive?
- Eject Backup Plus 5TB Safely
- Moving data between two systems
- Seagate-S drive Missing
- Windows Disk Error Checking on Backup Plus 5TB
If you have forgotten the changed password of the Seagate NAS device, carry out the simple instructions mentioned on this web page. Perform the following step by step instruction that how to reset Seagate Nas Password and Username.
- The Reset button for the Seagate NAS device is located at its rear side.
- Check if the Seagate NAS device is powered up.
- After locating the Reset button, press and hold it using a paper clip or other small objects.
- Note: Do not hold the Seagate NAS device’s Reset button for more than 10 seconds.
- Now, the Seagate NAS device is set to the default factory settings.
- Turn off the Seagate NAS device. Leave it for two minutes and then power up the Seagate NAS device.
- This will restart the device. Once done, use the default credentials to access NAS.
- The default username for the Seagate NAS device – admin
- The default password for the Seagate NAS device – admin
- If you have any doubts about resetting the Seagate NAS device password, click the Call button to get remote assistance from our technical experts.
- By using these steps we can execute that how to reset Seagate Nas password.
